Pre Treatment

vorbehandlung-kategoriebild-jentner_shop

Pre Treatment

Here you will find all the requirements for pretreating for your product, which have to be electroplated.

Before you start galvanizing, you have to degrease your parts. Here you will find degreasing salt. Do you want to activate steel, copper or passive nickel layers? You need paper salt.

You don't know how to remove sulfide or oxide layers? OxiEx is the right solution for you! You don't want to coat the whole part, only individual places, and want to ensure that they keep their original surface? Here you will find covering varnish.

A variety of products for the pretreatment for parts which have to be electroplated are available.

Covering varnish RED JE705n

Der Abdecklack Rot JE705n wird beim partiellen Beschichten von Schmuckstücken angewendet. Besonders gut geeignet ist er für statische Teile, wie z.B. Ringe. Er ist beständig gegen galvanische Elektrolyte, Salzlösungen, ozonisiertes und gechlortes Wasser. Der Abdecklack weist eine hohe Wetter- und Wasserbeständigkeit auf und ist für galvanische Elektrolyte geeignet, die bei Raumtemperatur arbeiten.

€118.30*

Covering varnish RED JE705n (100g)

The covering varnish red JE705n (100g) is often used for the partial coating of jewellery pieces. It is particularly suitable for static parts such as rings. Usually it is resistant to galvanic electrolytes, salt solutions, ozonized and chlorinated water. The covering varnish is weather and water resistant and especially suitable for galvanic electrolytes which work with room temperature.

€19.70*

Covering varnish, blue JE703 (1 kg)

The covering varnish blue JE703 is often used for the partial coating of jewellery pieces. It is particularly suitable for flexible parts, such as chains. Usually it is resistant to galvanic electrolytes, salt solutions, ozonized and chlorinated water. The covering varnish is weather and water resistant and also heat resistant.

€85.40*

Covering varnish, blue JE703 (100 g)

The covering varnish blue JE703 is often used for the partial coating of jewellery pieces. It is particularly suitable for flexible parts, such as chains. Usually it is resistant to galvanic electrolytes, salt solutions, ozonized and chlorinated water. The covering varnish is weather and water resistant and also heat resistant.

€15.20*

Decoction Agent JE622

The JE622 decoction agent/gypsum remover is ideal for decocting soldered parts. This eliminates the annoying and dangerous work with sulphuric acid. JE622 can be rinsed off easily and the solution does not need to be brought to the boil.Tank material: PPHBath temperature: 60-80 ° CDive time: ca. 3-5 secondsForm of delivery: · Salt form

€14.00*

Drum polish concentrate Delta SG

Delta SG is a universally applicable drum polishing concentrate. It is over 95% biodegradable and does not cause any problems in waste water treatment. It can be used in polishing drums as well as in vibrators.Bath preparation / dosageper liter of tank volume are used:20 - 40 ml drum polish concentrate Delta SG

€8.20*

Drum polish concentrate Delta SG (1 kg)

Delta SG is a universally applicable drum polishing concentrate. It is over 95% biodegradable and does not cause any problems in waste water treatment. It can be used in polishing drums as well as in vibrators.Bath preparation / dosageper liter of tank volume are used:20 - 40 ml drum polish concentrate Delta SG

€8.20*

Electrolytic Degreasing Salt JE610

The degreasing salt JE610 is a degreasing agent which is free of cyanide. It is used for the cathodic degreasing of all usual metallic objects.Working conditions:Bath preparation: 60-90 g degreasing salt are dissolved in 1 litre demineralised waterVoltage: 6-10 VoltBath temperature: 20-25°CExposition time: 30-180 sec.Anodes: Stainless steel

€17.50*

Electrolytic Degreasing Salt JE610 (100 g)

The degreasing salt JE610 is a degreasing agent which is free of cyanide. It is used for the cathodic degreasing of all usual metallic objects.Working conditions:Bath preparation: 60-90 g degreasing salt are dissolved in 1 litre demineralised waterVoltage: 6-10 VoltBath temperature: 20-25°CExposition time: 30-180 sec.Anodes: Stainless steel

€9.10*

Etching salt JE802

Etching salt JE802 is ideal for neutralising after alkaline pre-treatment and for activating steel, copper, copper alloys and passive nickel layers. Activation with JE802 replaces the previously used acid dipping based on sulphuric or hydrochloric acid.Operating Data:Tank material: PPHBath temperature: Room temperatureDive time: ca. 10-25 secondsForm of delivery:· Salt form

€19.20*

OxiEx JE709

OxiEx JE709 is a water-based deoxitation agent which is used to remove sulfid and oxid layers from silver surfaces and low alloyed gold. OxiEx can can be used for different decorative and technical applications. The ready-to-use solution enables an easy handling and it is suitable for brush and dive procedures.Working conditions:Temperature: 20-30°CExposition time: 1-30 min.

€11.30*

OxiEx JE709 (1L)

OxiEx JE709 is a water-based deoxitation agent which is used to remove sulfid and oxid layers from silver surfaces and low alloyed gold. OxiEx can can be used for different decorative and technical applications. The ready-to-use solution enables an easy handling and it is suitable for brush and dive procedures.Working conditions:Temperature: 20-30°CExposition time: 1-30 min.

€33.30*

Polishing Compound Delta M

Delta -M- is a universal drum polishing concentrate. It is over 95% biodegradable and causes no problems in waste water treatment. The service life has been extended by a factor of 2 compared to other polishing agents. It can be used in trommels, as well as in vibrators and centrifugal disc machines.

€10.40*

Polishing Compound Delta M (1 kg)

Delta -M- is a universal drum polishing concentrate. It is over 95% biodegradable and causes no problems in waste water treatment. The service life has been extended by a factor of 2 compared to other polishing agents. It can be used in trommels, as well as in vibrators and centrifugal disc machines.

€10.40*

Silver Conductive Lacquer JE900 (20 g)

The conductive silver laquer JE900 is used to obtain conductive coatings on non-precious metals such as glas, ceramic or wood.Please note that this article is a dangerous good according to the legal guidelines. For this reason we need a copy of your business registration. Therefore we kindly ask you to send us the business registration in advance.

€58.60*

Ultrasonic Cleaning NEUTRAL - 1kg

Content: 1 liter

The liquid ultrasonic cleaner Neutral is especially suitable for gold, silver, steel and metal. Neutral fulfils the legal requirements due to it's 80% biodegradability according to OECD methods.Preparation mixture: 1-5%Bath temperature: 60-80°CExposition time: 30-120 sec.

€17.40*

Ultrasonic Cleaning Salt RAPID JE811 (1 kg)

Content: 1 liter

Rapid JE811 is a highly alkaline ultrasonic cleaning agent in powder form, which is escpecially suitable for steel and gold. JE811 comes up to the demands for biodegradability of the RVO to the washing agent law. Preparation mixture: 30-50g/lBath temperature: 60-80°CExposition time: 30-120 sec.

€22.60*

Ultrasonic Cleaning Salt Ultra 25

Content: 1 liter

Ultra 25 is an universal ultrasonic cleaning agent in powder form, which is especially suitable for precious metals, copper and brass.Preparation mixture: 30-50g/lBath temperature: 60-80°CExposition time: 30-120 sec.

€22.40*

Ultrasonic Cleaning Solution VP17

Content: 1 liter

The liquid ultrasonic cleaning concentrate VP17 is especially suitable for gold, silver, steel and metals. VP17 fulfils the legal requirements due to it's 80% biodegradability according to OECD methods.Preparation mixture: 10-20 ml/lBath temperature: 60-80°CExposition time: 30-120 sec.

€17.00*

Electroplating equipment from Jentner

Our electroplating units are available in both digital and analogue form. With them, all common electroplating processes can be easily implemented, regardless of whether you are working with precious or base metals. With our digital systems, the process is facilitated by a high degree of user-friendliness. Important values such as temperature, current and voltage are clearly shown on a digital display, making it easier to electroplate your workpieces.

The digital units also offer you the option of precisely calculating the precious metal consumption, enabling you to work in a targeted, clean manner. On top of that, the electroplating units have integrated product movements as well as connections for pin electroplating.

Owing to our structured work in almost all areas of electroplating, our units are optimally matched to all common electroplating baths. This allows you to work safely and reliably.

Our diverse product range is rounded off with a large selection of matching accessories for the corresponding electroplating units. So nothing stands in the way of optimal work in electroplating!