Rhodium baths produce brilliantly shiny, abrasion-resistant coatings in brilliant white or elegant black. Particularly popular in the jewelry, eyewear and watchmaking industries, our rhodium electrolytes offer excellent throwing power for uniform coatings.
The black rhodium bath JE23-1 deposits dark anthracite-grey, particular decorative rhodium coatings. The layers are very abrasion resistant, colour consistent and uniform. The electrolyte is preferably used for decorative coatings in the jewellery and eyewear industry. JE23-1 is characterized by it's easy handling and usability. It works at room temperature so a time and energy intensive heating-up can be omitted. Coatings up to 0,5 µm can be deposited.
Operating Data:Rhodium content: 2,0 g/L RhpH-Value: <1Density: 1,02 – 1,07 g/cm3
Working conditions:Voltage: 2 - 3 VoltBath temperature: 20 - 27°CExposition time: 2 min. (1 - 5 min.)Anodes: Platinized titanium, mixed-metal-oxideAnode/ Cathode: 1:1Current density: 1,0 - 1,5 A/dm2Agitation: required
Deposition rate: 6 - 8mg/AminBath filtration: ab 10 LiterDeposition Data:Hardness: 300 - 370 HVLayer thickness: max. 0,5 μmLayer density: ca. 10,5 g/cm3Form of delivery:Ready for use
The JE23GO! RS NDG black rhodium bath is a pioneering solution in electroplating. Its decisive advantage is that it does not have to be declared as a hazardous material, which enables uncomplicated international shipping. The application at room temperature minimizes the effort required for heating and simplifies the process considerably.This product is ideal for decorative coatings in the jewelry and eyewear industry. It produces dark anthracite-grey coatings that are characterized by excellent abrasion resistance, colour consistency and uniformity. The black rhodium electrolyte JE23GO! RS NDG black rhodium electrolyte offers simple bath management and user-friendly handling. It enables the precise deposition of layers down to 0.5 µm, which supports a wide range of applications in electroplating. Operating Data Rhodium content: 1,0 g/L Rh pH-Value: <1 Density: 1,02 – 1,07 g/cm3 Deposition Data Color, L-Value: 48 - 50 Hardness: 300 – 370 HV Layer thickness: max. 0,5 μm Layer density: ca. 10,5 g/cm3 Working conditions Voltage: 2,5– 3,5 Volt Bath temperature: Ca. 20°C (RT) Exposition time: 5 min. (3 – 15) Anodes: Platinised titanium or mixed-metal-oxide Anode/ Cathode: 1 : 1 Current density: 1,0 – 1,5 A/dm2 Agitation: advantageous Bath filtration: ab 10 Liter Deposition rate: 6 – 8mg/Amin Form of delivery Ready for use 1 g/L
The black rhodium bath JE23GO! RS NDG represents an innovative technology in electroplating. An outstanding advantage of this product is that it is not classified as dangerous goods, which ensures problem-free worldwide shipping. Application at room temperature reduces the energy required for heating and optimizes the process.Particularly suitable for decorative coatings in the jewelry and eyewear industries, this bath produces dark anthracite-gray coatings with remarkable abrasion resistance and color consistency. The black rhodium electrolyte JE23GO! RS NDG black rhodium electrolyte is characterized by easy handling and effortless bath guidance. It enables the precise deposition of layers down to 0.5 µm, making it versatile in various areas of electroplating.Operating DataRhodium content: 2,0 g/L RhpH-Value: <1Density: 1,02 – 1,07 g/cm3Deposition DataColor, L-Value: 48 - 50Hardness: 300 – 370 HVLayer thickness: max. 0,5 μmLayer density: ca. 10,5 g/cm3Working conditionsVoltage: 2,5– 3,5 VoltBath temperature: Ca. 20°C (RT)Exposition time: 5 min. (3 – 15)Anodes: Platinised titanium or mixed-metal-oxideAnode/ Cathode: 1 : 1Current density: 1,0 – 1,5 A/dm2Agitation: advantageousBath filtration: ab 10 LiterDeposition rate: 6 – 8mg/AminForm of deliveryReady for use 2 g/L
The black rhodium bath JE23-1 deposits dark anthracite-grey, particular decorative rhodium coatings. The layers are very abrasion resistant, colour consistent and uniform. The electrolyte is preferably used for decorative coatings in the jewellery and eyewear industry. JE23-1 is characterized by it's easy handling and usability. It works at room temperature so a time and energy intensive heating-up can be omitted. Coatings up to 0,5 µm can be deposited.Operating data:Rhodium content: 2,0 g/100ml RhpH-Value: <1Density: 1,02 - 1,07 g/cm3
Working conditions:Voltage: 2 - 3 VoltBath temperature: 20 - 27°CExposition time: 2 min. (1 - 5 min.)Anodes: Platinized titanium, mixed-metal-oxideAnode/ Cathode: 1:1Current density: 1,0 - 1,5 A/dm2Agitation: requiredDeposition rate: 6 - 8mg/AminBath filtration: ab 10 LiterDeposition data:Hardness: 300 - 370 HVLayer thickness: max. 0,5 μmLayer density: ca. 10,5 g/cm3Form of delivery:Concentrate form 2 g/100ml Rh for 1 litre bathConcentrated bath preparation:Mix 100 ml of the Rhodium JE88 concentrate with 900 ml distilled water.
The rhodium bath JE88 deposits mirror shining, brilliant white, magnificent hard and abrasion resistant rhodium layers. The color of JE88 CLEAN may vary in slight nuances as the product is produced exclusively from recycled rhodium. It is preferably used for decorative coatings in the jewellery industry. In many cases the rhodium electrolyte is used as tarnish protection for silver products. Coatings up to 1,0 µm can be deposited.Operating data:Rhodium content: 2,0 g/L RhpH-Value: <1Operating conditions:Voltage: 2-3 VoltBath temperature: 20-35°CExposition time: 2 min. (1-max. 10 min.)Anodes: platinized titanium or mixed metal oxideAnode/Cathode surface: 1 : 1Agitation: advantageousCurrent density: 0,5 - 2 A/dm2Bath filtration: from 10 litersDeposition data:Hardness: 800 - 900 HVLayer thickness: max. 1,0 µmLayer density: approx. 12,4 g/cm3Form of delivery:-Ready for use 2 g/L Rh-Concentrate form 2 g/100ml Rh for 1 litre bath
The rhodium bath JE88 deposits mirror shining, brilliant white, magnificent hard and abrasion resistant rhodium layers. It is preferably used for decorative coatings in the jewellery industry. In many cases the rhodium electrolyte is used as tarnish protection for silver products. Coatings up to 1 µm can be deposited.Operating data:Rhodium content: 2,0 g/L RhpH-Value: <1Operating conditions:Voltage: 2 - 3 VoltBath temperature: 20 - 40 °CExposition time: 2 min. (1 - max. 10 min.)Anodes: platinized titanium or mixed metal oxideAnode/Cathode surface: 1:1Agitation: advantageousCurrent density: 0,5 - 2 A/dm2Bath filtration: from 10 litersDeposition data:Hardness: 800 - 900 HVLayer thickness: max. 1,0 µmLayer density: approx. 12,4 g/cm3Form of delivery:- Ready for use 2 g/L Rh- Concentrate form 2 g/100ml Rh for 1 litre bath
The JE88! GO NDG rhodium bath represents a significant innovation in electroplating technology. It is the first rhodium that is not classified as a hazardous material during transportation, allowing for safe and easy worldwide shipping.This advanced rhodium is ideal for decorative coatings in the jewelry, eyeglass frame and watch industries. It also provides effective tarnish protection for silverware. With the ability to precisely deposit layers down to 1.0 µm, the JE88! GO NDG rhodium bath ensures exceptional brilliance and durability. Its versatility makes it the ideal choice for various electroplating applications.Operating Data: Rhodium content: 0,5 g/L pH-Value: <1 Working conditions: Voltage: 2,5 – 3,5 Volt Bath temperature: 20 - 30° C Exposition time: 2 min. (1 max. 10 min) Anodes: Platiniertes Titan oder Mischoxid MOX Anode/ Cathode: 1 : 1 Current density: 0,5 – 2,0 A/dm2 Agitation: advantageous Bath filtration: from 10 Liter Deposition rate: 6 – 8mg/Amin Form of Delivery: Ready for use 0,5 g/L
The JE88! GO NDG rhodium bath offers a decisive advantage: it is the first rhodium that does not have to be declared as dangerous goods during transportation. This innovation enables problem-free and safe worldwide shipping.The revolutionary rhodium is ideal for decorative coatings with a small electroplating process in the jewelry, eyeglass frame and watch industries. It is also frequently used as effective tarnish protection for silverware. The precise deposition of layers of up to 1.0 µm enables outstanding brilliance and durability. The versatile application makes the JE88! GO NDG rhodium bath the ideal choice for various electroplating processes.Operating Data:Rhodium content: 1,0 g/LpH-Value: <1Working conditions:Voltage: 2,5 – 3,5 VoltBath temperature: 20 - 30° CExposition time: 2 min. (1 max. 10 min)Anodes: Platiniertes Titan oder Mischoxid MOXAnode/ Cathode: 1 : 1Current density: 0,5 – 2,0 A/dm2Agitation: advantageousBath filtration: from 10 LiterDeposition rate: 6 – 8mg/AminForm of Delivery:Ready for use 1,0 g/L
The JE88! GO NDG rhodium bath offers a decisive advantage: it is the first rhodium that does not have to be declared as dangerous goods during transportation. This innovation enables problem-free and safe worldwide shipping.The revolutionary rhodium is ideal for decorative coatings with a small electroplating process in the jewelry, eyeglass frame and watch industries. It is also frequently used as effective tarnish protection for silverware. The precise deposition of layers of up to 1.0 µm enables outstanding brilliance and durability. The versatile application makes the JE88! GO NDG rhodium bath the ideal choice for various electroplating processes.Operating Data:Rhodium content: 2,0 g/LpH-Value: <1Working conditions:Voltage: 2,5 – 3,5 VoltBath temperature: 20 - 30° CExposition time: 2 min. (1 max. 10 min)Anodes: Platiniertes Titan oder Mischoxid MOXAnode/ Cathode: 1 : 1Current density: 0,5 – 2,0 A/dm2Agitation: advantageousBath filtration: from 10 LiterDeposition rate: 6 – 8mg/AminForm of Delivery:Ready for use 2,0 g/L
The rhodium bath JE88-1 deposits mirror shining, brilliant white, magnificent hard and abrasion resistant rhodium layers. The color of JE88 CLEAN may vary in slight nuances as the product is produced exclusively from recycled rhodium. It is preferably used for decorative coatings in the jewellery industry. In many cases the rhodium electrolyte is used as tarnish protection for silver products. Coatings up to 0,5 µm can be deposited.Operating data:Rhodium content: 1,0 g/L RhpH-Value: <1Operating conditions:Voltage: 2-3 VoltBath temperature: 20-35°CExposition time: 2 min. (1-max. 10 min.)Anodes: platinized titanium or mixed metal oxideAnode/Cathode surface: 1 : 1Agitation: advantageousCurrent density: 0,5 – 2 A/dm2Bath filtration: from 10 litersDeposition data:Hardness: 800 – 900 HVLayer thickness: max. 0,5 µmLayer density: approx. 12,4 g/cm3Form of delivery:-Ready for use 1 g/L Rh-Concentrate form 1 g/100ml Rh for 1 litre bath
The rhodium bath JE88-1 deposits mirror shining, brilliant white, magnificent hard and abrasion resistant rhodium layers. It is preferably used for decorative coatings in the jewellery industry. In many cases the rhodium electrolyte is used as tarnish protection for silver products. Coatings up to 0,5 µm can be deposited.Operating data:Rhodium content: 1,0 g/L RhpH-Value: < 1Operating conditions:Voltage: 2 - 3 VoltBath temperature: 20 - 40 °CExposition time: 2 min. (1 - max. 10 min.)Anodes: platinized titanium or mixed metal oxideAnode/Cathode surface: 1 : 1Agitation: advantageousCurrent density: 0,5 - 2 A/dm2Bath filtration: from 10 litersDeposition data:Hardness: 800 - 900 HVLayer thickness: max. 0,5 µmLayer density: approx. 12,4 g/cm3Form of delivery:- Ready for use 1 g/L Rh- Concentrate form 1 g/100ml Rh for 1 litre bath
The rhodium bath black for JE29-1 for pen is especially suitable for partial plating, for multi-colour processeing and reparation or restoration. The deposited coatings have a dark anthracite-grey colour and they are hard and abrasion resistant. JE29-1 deposits uniform rhodium layers and has a strong colour consistency.The plating layer created by pen plating is very thin. If you would like a thicker layer, we recommend that you treat the goods in a normal electroplating bath.Rhodium content: 1g Rh/50 mlVoltage: 6-10 VoltBath temperature: Room temperature
The rhodium bath black for JE29-1 for pen is especially suitable for partial plating, for multi-colour processeing and reparation or restoration. The deposited coatings have a dark anthracite-grey colour and they are hard and abrasion resistant. JE29-1 deposits uniform rhodium layers and has a strong colour consistency.The plating layer created by pen plating is very thin. If you would like a thicker layer, we recommend that you treat the goods in a normal electroplating bath.Rhodium content: 2g Rh/100 mlVoltage: 6-10 VoltBath temperature: Room temperature
The rhodium concentrate JE88 deposits mirror shining, brilliant white, magnificent hard and abrasion resistant rhodium layers. It is preferably used for decorative coatings in the jewellery industry. In many cases the rhodium electrolyte is used as tarnish protection for silver products. Coatings up to 1 µm can be deposited.Operating data:Rhodium content: 2,0 g/100ml RhpH-Value: <1Operating conditions:Voltage: 2 - 3 VoltBath temperature: 20 - 40 °CExposition time: 2 min. (1 - max. 10 min.)Anodes: platinized titanium or mixed metal oxideAnode/Cathode surface: 1:1Agitation: advantageousCurrent density: 0,5 - 2 A/dm2Bath filtration: from 10 liters
Deposition data:Hardness: 800 - 900 HVLayer thickness: max. 1,0 µmLayer density: approx. 12,4 g/cm3Form of delivery:- Ready for use 2 g/L Rh- Concentrate form 2 g/100ml Rh for 1 litre bathConcentrated bath preparation:Mix 100 ml of the Rhodium JE88 concentrate with 900 ml distilled water.
The rhodium concentrate CLEAN JE88 deposits mirror shining, brilliant white, magnificent hard and abrasion resistant rhodium layers. The rhodium concentrate CLEAN is produced exclusively from recycled rhodium. It is preferably used for decorative coatings in the jewellery industry. In many cases the rhodium electrolyte is used as tarnish protection for silver products. Coatings up to 1 µm can be deposited. Operating data:Rhodium content: 2,0 g/100ml Rh pH-Value: < 1 Operating conditions:Voltage: 2 - 3 VoltBath temperature: 20 - 40 °CExposition time: 2 min. (1 - max. 10 min.)Anodes: platinized titanium or mixed metal oxideAnode/Cathode surface: 1 : 1Agitation: advantageousCurrent density: 0,5 - 2 A/dm2Bath filtration: from 10 litersDeposition data:Hardness: 800 - 900 HV Layer thickness: max. 1,0 µm Layer density: approx. 12,4 g/cm3 Form of delivery:- Ready for use 2 g/L Rh - Concentrate form 2 g/100ml Rh for 1 litre bath
Concentrated bath preparation:Mix 100 ml of the Rhodium JE88 concentrate with 900 ml distilled water.
The rhodium concentrate JE88-1 deposits mirror shining, brilliant white, magnificent hard and abrasion resistant rhodium layers. It is preferably used for decorative coatings in the jewellery industry. In many cases the rhodium electrolyte is used as tarnish protection for silver products. Coatings up to 0,5 µm can be deposited.Operating data:Rhodium content: 1,0 g/100ml RhpH-Value: <1Operating conditions:Voltage: 2 - 3 VoltBath temperature: 20 - 40 °CExposition time: 2 min. (1 - max. 10 min.)Anodes: platinized titanium or mixed metal oxideAnode/Cathode surface: 1 : 1Agitation: advantageousCurrent density: 0,5 - 2 A/dm2Bath filtration: from 10 litersDeposition data:Hardness: 800 - 900 HVLayer thickness: max. 0,5 µmLayer density: approx. 12,4 g/cm3Form of delivery:- Ready for use 1 g/L Rh- Concentrate form 1 g/100ml Rh for 1 litre bathConcentrated bath preparation:Mix 100 ml of the Rhodium JE88 concentrate with 900 ml distilled water.
The rhodium concentrate JE88-1 deposits mirror shining, brilliant white, magnificent hard and abrasion resistant rhodium layers. The rhodium concentrate CLEAN is produced exclusively from recycled rhodium. The color of the electrolyte in the bottle may vary slightly, as the product is made exclusively from recycled rhodium. However, this does not affect the color of the deposited rhodium layer.
It is preferably used for decorative coatings in the jewellery industry. In many cases the rhodium electrolyte is used as tarnish protection for silver products. Coatings up to 0,5 µm can be deposited. Operating data:Rhodium content: 1,0 g/100ml Rh pH-Value: < 1 Operating conditions:Voltage: 2 - 3 VoltBath temperature: 20 - 40 °CExposition time: 2 min. (1 - max. 10 min.)Anodes: platinized titanium or mixed metal oxideAnode/Cathode surface: 1 : 1Agitation: advantageousCurrent density: 0,5 - 2 A/dm2Bath filtration: from 10 litersDeposition data:Hardness: 800 - 900 HV Layer thickness: max. 0,5 µm Layer density: approx. 12,4 g/cm3 Form of delivery:- Ready for use 1 g/L Rh- Concentrate form 1 g/100ml Rh for 1 litre bath Concentrated bath preparation:Mix 100 ml of the Rhodium JE88 concentrate with 900 ml distilled water.
Rhodium Replenisher for Rhodiumbath JE 88. The rhodium bath JE88 deposits mirror shining, brilliant white, magnificent hard and abrasion resistant rhodium layers. It is preferably used for decorative coatings in the jewellery industry. In many cases the rhodium electrolyte is used as tarnish protection for silver products. Coatings up to 1,0 µm can be deposited.Rhodium content 5 g/100ml
The rhodium bath JE28-1 for pen is especially suitable for partial plating, for multi-colour processeing and reparation or restoration. The deposited coatings have a brilliant white colour and they are hard and abrasion resistant. JE28-1 deposits uniform rhodium layers and has a strong colour consistency.The plating layer created by pen plating is very thin. If you would like a thicker layer, we recommend that you treat the goods in a normal electroplating bath.Rhodium content: 1g Rh/50 mlVoltage: 10 - 11 VoltBath temperature: Room temperature
The rhodium bath JE28-1 for pen is especially suitable for partial plating, for multi-colour processeing and reparation or restoration. The deposited coatings have a brilliant white colour and they are hard and abrasion resistant. JE28-1 deposits uniform rhodium layers and has a strong colour consistency.The plating layer created by pen plating is very thin. If you would like a thicker layer, we recommend that you treat the goods in a normal electroplating bath.Rhodium content: 2g Rh/100 mlVoltage: 10 - 11 VoltBath temperature: Room temperature
€452.87*
Rhodium baths for shiny surfaces
Rhodium electrolytes can be used to coat surfaces with a glossy white finish. The applied surfaces are particularly abrasion-resistant and are mainly used as decorative coatings for spectacle frames, watches or jewelry. Compared to conventional electrolytes, rhodium electrolytes are characterized by a particularly good scattering ability. Those who prefer dark surfaces can use black rhodium.
This can be used to coat surfaces from anthracite to black. The range also includes JE88 rhodium regeneration. This regeneration solution also deposits decorative, brilliant white surface coatings. It is also characterized by high abrasion resistance and high corrosion resistance. In fact, it serves as tarnish protection for silverware. Our black rhodium bath deposits dark anthracite-grey to black rhodium layers.
These are very abrasion-resistant, color-constant and uniform in the coating. This electrolyte is also the preferred choice for decorative coatings in the eyewear and jewelry industry. Our rhodium bath is characterized by simple bath management and uncomplicated handling. Our rhodium product range is rounded off with our pin rhodium baths. These are particularly suitable for partial coatings with pin electroplating. The electrolyte produces a fast and even deposition and impresses with its high color intensity.
Translated with DeepL.com (free version)
This website uses cookies to ensure the best experience possible. More information...